Product Description

The Vision Mount MF215 is a full-motion wall mount for small to medium LCD TVs. Sanus Systems' Virtual Axis 3D¿ technology allows mount to tilt, swivel, pan and extend with fluid motion in every direction possible up to 15 from the wall. Full motion allows easy viewing from multiple angles, and adjustment knob enables TV to move easily while maintaining tension for the perfect viewing angle. Keyholes on faceplate slide onto TV and into place for effortless bracket alignment and easy installation. Includes two VESA-compatible TV brackets: large bracket fits 200 x 200, 200 x 100 and 100 x 100; small bracket fits 100 x 100 and 75 x 75 to accommodate virtually any 15 to 37 LCD TV or monitor up to 60 lbs.

Product Details

• Brand: Sanus
• Model: MF215-B1
• Dimensions: 3.80" h x 11.90" w x 13.70" l, 5.70 pounds

Features

• Decorative Cover Conceals Hardware For Finished Look
• Virtual Axis 3D¿ Allows For Fluid Motion
• Easy To Install
• Includes 2 Vesa®-Compatible Tv Brackets & Hardware
• Holds Up To 60 Lbs

Customer Reviews

Sanus MF215-B1
I was looking for a mount for a 32 inch Westinghouse LCD TV high up on a wall in our bedroom. One main concern I had was I wanted a mount that would allow me to mount directly into a stud for maximum support. Since this unit has just two mounting holes one above the other this worked out great. Other units have four mounting holes and therefore the screws would have been on either side of the stud into the plaster wall or two in the stud and two into the plaster, not quite as ideal. This unit came with easy instructions, large size lag bolts for mounting to the wall and is well constructed, etc. Took only an hour to mount. The unit has one drawback, that is the gimble (rounded mount for tilting) on the back of the mounting plate. It had a difficult time supporting this large of a TV and is pushing the maximum limit on size and weight as the gimble screw had to be tightened very tight to keep the TV from tipping down all the time. I did not plan to move the TV once mounted so I was able to really tighten up this screw but at the time I was affaid I would strip the screw or crack the mount but so far no problem. If you are considering moving the TV once mounted and it is large like the one I mounted then I would suggest a differnt unit as it will keep tipping down. I would recommend buying this mount but watch the TV size and weight.

Does not stay level?
Installed with a Sharp Aquos 32" with built in Blu-ray player (about 30lbs total weight). Unfortunately the LCD tilts/slightly rotates to the right, the heavier side of the LCD due to the Blu-ray player's slightly extra weight on the right side. The set screw/bolt is designed to hold the LCD at a certain rotational position. The set screw/bolt does not produce enough compression or friction to overcome the extra weight of the Blu-ray and hold the LCD at a zero degree position. I'm considering adding extra weight to better balance the weight distribution. Otherwise, the overall device installed with minor effort. Considerable torque at fully extended position. Must be mounted to a stud or concrete wall for adequate anchoring. I would have concerns with a heavier TV over time. I researched dozens of mounting devices before purchasing this device. I have specified dozens of wall mount devices for much heavier monitors over the past few years, and this company makes some of the better mounts for the price level.

Excellent TV Wall Mount!
After looking at many types of mounts I decided on the Sanus MF215-B1 wall mount.
Upon it's arrival I was not disappointed!
This mount is better than expected. It has two different mounting brackets to accomadate different TVs. The bearing points on the mount are heavy duty and well engineered. The instructions are complete and understandable.
This mount was used for a 26" LCD TV.
I highly recommend this mount.