Product Description

Design to allow for accurate and repeatable cuts at any angle and lengthwise cuts for starter course used along lower edge of the roof. Cuts any asphalt or fiberglass shingle, starter row either U.S. or Metric, material face up or face down and from eithe r top or bottom edge, and ridge cap. Two offset holes, one for metric or U.S. shingles. Crosscut guide adjust full 180-degrees for any angle. Can be set up by using a cleat to prevent slippage or set up by using a piece of 2 x 10 Lumber and footing the to ol against it or by using 6" x 90-degree roof bracket.

Product Details

• Amazon Sales Rank: #20802 in Home Improvement
• Brand: Qual-Craft
• Model: 1000
• Number of items: 1

Features

• Designed to allow for accurate and repeatable cuts at any angle
• Can be used for lengthside cuts for a starter course
• Two offset holes (one for metric and one for U.S. shingles)
• Crosscut guide adjusts a full 180 degrees for any angle
• Cuts face up or face down, and from either the top or bottom edge

From the Manufacturer
The Qual-Craft Shingle Shark is designed to allow for accurate and repeatable cuts at any angle, as well as lengthwise cuts for a starter course used along the edge of the roof. It has two offset holes, one for meteric and one for US shingles. The crosscut guide adjusts a full 180 degrees for any angle, cuts face up or face down and from either the top or bottom edge. It can be set up by using a cleat to prevent slippage, using a piece of two-by-ten lumber and footing the tool against it, or by using a 6-inch by 90-degree roof bracket.

Customer Reviews

ShingleShark
I have had the ShingleShark for about two months,most of the shingle jobs that we do are with laminated shingles (shakes),cutting them with a utility knife took forever,and you were always changing blades, with the shark just a push of the handle and you are done. For cutting starters it can't be beat. I found nothing wrong with the ShingleShark. I found it to be a time saver, I would not be without, one a good investment.

SHINGLE SHARK
THE SHINGLE SHARK WORKS GREAT WHEN ITS NEW. BUT NOW AFTER USING IT TO HELP ME INSTALL ABOUT 300 SQ THE FIXED BLADE IS NO LONGER STRAIGHT BUT HAS A CURVE WORN IN IT WHERE IT GETS THE MOST USE. FOR WHAT YOU HAVE TO PAY FOR THE THING THEY SHOULD MAKE THE BLADES CHANGABLE.

WELL THOUGHT OUT AND WELL BUILT
I HAVE HAD THE CUTTER FOR ABOUT TWO WEEKS AND FOUND THAT THE GUYS TEND TO FIGHT OVER WHO GETS TO CARRY IT UP BECAUSE THEY WANT IT FOR THEMSELVES!! THE CUTTER HANDLES THE STRAIGHT CUTS WITH EASE, AND THE LONG VALLY CUTS ARE VERY EASY TO SETUP. THE GUIDE IS VERY WELL DESIGNED AND EASY TO SET. IT ALSO COMES WITH COMPLETE INSTRUCTIONS TO ADJUST THE BLADE ANYTIME INSTEAD OF HAVING TO BUY NEW ONES!!! I SEE A LOT OF LABOR SAVINGS ALREADY. THANKS BUNKY