Product Description

Advanced penetrating microbond protection Maximum protection against all stains Makes cleaning stone easier Preserves natural look Water-based low-solids coating Interior & exterior Where to Use Natural stone such as marble, granite, limestone, slate, terrazzo, travertine & sandstone. Best suited for the most porous stone surfaces. Directions Always test in a small inconspicuous area with a 24-hour cure time to determine ease of application and desired results. Allow new grout installations to cure for a minimum of 72 hours prior to application. Make sure surface is clean, dry and free of waxes and coatings. Mask off and protect any baseboards or adjacent areas to avoid splashing and overspray onto surfaces not intended to be treated. Sealer may be applied to damp surfaces one hour after standing water has been removed. Liberally apply an even coat using a paint pad, low-pressure chemical-resistant sprayer, roller or brush. Allow sealer to penetrate the surface for 15-30 minutes. During this time, distribute excess over entire area to insure even penetration. Wipe entire surface thoroughly with clean dry towel. A second coat may be needed for porous, absorbent surfaces and should be applied 30-40 minutes after initial application as directed in steps 3-4. A minimum of 15 minutes after final application, wipe entire surface with a clean dry towel to remove any excess sealer. If needed, dampen white nylon pad with sealer to remove residue and dry again thoroughly with clean dry towel. A full cure is achieved after 24-72 hours; foot traffic may begin in 6-8 hours. Cover with red rosin paper, if foot traffic must resume before the recommended time periods have passed. Clean equipment with water. Size and Coverage - Quart: 50 - 300sq. ft. Expected Wear: 3-5 years on interior surfaces & 1-3 years on exterior surfaces. Stonetech

Product Details

• Amazon Sales Rank: #1158 in Home Improvement
• Brand: Granite City Tool
• Model: BPSS12-32
• Number of items: 1
• Dimensions: 2.90 pounds

Features

• Unique, extra strength stain protector for interior porous natural stone and grout
• Delivers maximum protection for natural stones
• Provides coverage for up to 400 square feet
• Formulated with advanced, water based fluoropolymers
• Protects up to 5 years on interior surfaces

Amazon.com Product Description
The StoneTech professional bulletppoof stone sealer is a unique, extra strength stain protector for interior porous natural stone and grout. Providing maximum protection for natural stones, this liquid is formulated with advanced, water based fluoropolymers to protect against the toughest oil and water based stains. The easy-to-use liquid can be used as an effective oil or water barrier, and provides coverage for up to 400 square feet. Other features include a water-based low-solids coating, premium stain protection, preservation of a natural look, and advanced penetrating microbond protection. Emitting a very low odor the product is also designed for interior use, and protects surfaces up to 5 years. The sealer also protects exterior surfaces for up to 3 years. The sealer is compatible with marble, granite, limestone, slate, terrazzo, travertine and sandstone and porous stone surfaces.

Customer Reviews

Powerhouse Sealer
This product works extremely well. I read a few negative reviews that people had written on this product and concluded that they did not read and/or follow the manufacture's directions. The reason I say this is that when my granite countertops were first installed, the installers only wiped this sealer over the surface then left. I too, had areas that would darken when water would hit the stone, and I wondered why. However, when I applied the sealer liberally (2 yrs later, for the first time since the countertops were installed), allow the sealer to penetrate the surface for 15-30mins (as recommended), wiped off the excess after 30min (which there was minimal, the stone absorbed most of the sealer), and did not use the surface for 24hrs (as recommended. By the way, I took advantage of sealing the surface before I went away for the weekend so that there was no impact to family life.) I had a nicely sealed surface. I no longer have areas that darken when water stands on the stone.

I would recommend this product to everyone.

Gave me peace of mind
After buying White Kashmir granite for kitchen and one bathroom, I learned that this granite is extremely porous. After researching bought and applied the BulletProof Stone Sealer. I was much relieved to see that, as advertised, this sealer does protect porous granites from all kinds of potentially staining products. The fact that sealer has a 72 hours curing time is a small price to pay for the peace of mind it provides. I now enjoy the granite without concerns. I highly recommend this product.

Good granite sealer
We purchased this item a few weeks ago after reading many positive reviews. The product was easy to apply and seems to be doing a good job.