Product Description

This powerful drill has the construction and performance to eliminate any other 1/2in. drill in its category. This heavy-duty Magnum drill is built for industrial/construction applications. Another exclusive feature is the brush cartridge system, with a set of spare brushes, that allows you to change brushes in less than one minute. Use this tool to drill into wood, metal, plastics and composites. U.S.A. Amps: 8, Chuck Size (in.): 1/2, Speed (RPM): 850, Cord Length (ft.): 8, Side Handle: Yes, Keyless Chuck: Yes, Variable Speed: Yes

Product Details

• Amazon Sales Rank: #17399 in Home Improvement
• Brand: Milwaukee
• Model: 0302-20
• Number of items: 1
• Dimensions: 6.00 pounds

Features

• Powerful 8-amp motor, 0 to 850 rpm, variable speed control
• All metal grip-lok single sleeve keyless chuck for a stronger hold on the bit and all metal gear case and diaphragm
• 360-degree locking side handle
• Ergonomic tactile grip and 2 finger trigger for user comfort and balance
• Backed by limited warranty

From the Manufacturer
This powerful 8.0 amp 1/2 inch drill has the construction and performance to eliminate any other 1/2 inch drill in its category. The value added convenience of the high torque all metal single sleeve keyless chuck and the quik-lok cord (48-76-4008) for instant replacement and easy storage are unmatched in the industry. The drill comes with a 49-15-0265 360º Side Handle.

Customer Reviews

Good solid drill
I did tons of research and testing before buying this drill. I was in the market for a cordless or corded, so I looked at both. I had to drill 40-50 7/8" holes through 1/4" steel and it killed my old 3-amp Craftsman drill doing it. I then purchased a Ryobi cordless (300lb./in. torque) and drilled some of the holes. The battery typically drained after 3 holes. I used the first gear for most of the holes I tried, but when I tried to use second gear to drill them faster it smoked the motor. I returned that and then read tons of reviews on corded and cordless for about 3 weeks. The Milwaukee cordless was my favorite but I couldn't afford the $100 more. As far as corded drills go, I looked really close at the DeWalt DW236 and the older short fat-body Milwaukee cordless also. The DeWalt feels slightly better in your hand, but only if you're holding it down on the handle. If you hold them higher up, they feel about the same except the Milwaukee 0302-20 is a tad bit heavier. The DeWalt and Milwaukee both have a single sleeve, all-steel keyless chuck, but the Milwaukee 0302-20 is much better. The 0302-20 holds the spindle in place so you can just turn the chuck with a single hand, whereas the DeWalt requires that you press a button with your other hand to hold the spindle in place while you tighten or loosen the chuck. The chuck tightens down really well and will not slip. Even when the bit caught and spun the upper half of my body with it, the chuck didn't lose grip on the bit. The Milwaukee also has the removeable cord, which is nice. Now that I've used the Milwaukee, I like it even more. The way you grip it really lets you get straight pressure to whatever you're drilling. The cord is somewhat of a hassle since I typically run a grinder, welder, and drill all at the same time and have cords going everywhere. Compared to the older fat-body 5.5 amp Milwaukee corded, this one feels way better. I leaned toward the fat one for a while until I actually picked it up. Your finger gets pinched as you release the trigger on the older ones and they're just not comfortable to hold, plus they cost the same for the same gears but only a 5.5 amp motor.

Smooth, light and powerful
I bought this after nearly burning out a cheaper drill while trying to drill holes to plant bulbs with a large bulb auger. The difference was amazing. Although more than twice as powerful as the other drill, this one is equally light, and far smoother and more controllable for this task. It quickly drilled 3" diameter holes 8" deep, even when it had to cut through gravel or a tree root to do so.

How powerful is this drill, and how well does the keyless chuck hold? After drilling 10 holes, ithe auger got stuck, and instead of stopping, the drill snapped off the end of the auger at the chuck. Fortunately, losing an inch of length didn't matter at all, but it emphasizes the respect with which such a powerful tool must be treated.

The all-metal keyless chuck is worth its added cost. The drill automatically locks in position while off, and releases when power is applied. This makes tightening a bit a simple matter of rotating the chuck clockwise. It has a ratchet action which holds the bit tighter than I can usually get a keyed chuck, yet releases easily when time to change bits, by simply rotating counter-clockwise.

Highly recommended.

A fine drill with plenty of power!!
This is the only corded drill I own though I have used many others. This Drill is rated at 8amps and you can really feel the power of it as I have never seen it bog down. The keyless Chuck is excellent and grips small bits very well. I was skeptical about a keyless chuck at first but after using this drill my fears were dispelled. The side handle is very versitile and sturdy providing positive control. Though the drill may at first appear large and awkward it is actually ergonimically very well designed. The drill is ment to be held between the thumb and index finger while the trigger is engaged by your other three fingers. This is a very stable and comfortable position. The only thing I thought would of been nice to see is the inclusion of user replaceable brushes. This is included on their 5.5 amp models but was removed on the new 8amp. I must also add that Amazon is selling this a bit higher than most local stores. This is not normal of Amazon so if anyone from Amazon is reading this check into it...