Product Description

JVC RX-8010V features premium performance with its high current power supply capable of handling 4 ohm loads, and a new high performance Motorola DSP. The new 24-bit DSP is capable of executing 150 million instructions per second (MIPS). This DSP power enables RX-8010V to provide the highest level of accuracy in decoding Dolby Digital and DTS movies. It also makes possible all-channel stereo, and the JVC exclusive DAP sound field. The headphone DSP mode can create the stereo sound as if you listen through the speakers while listening to a source using headphones. So you can feel as if you were in a music room. This mode can be used only when both of the front speakers are.When you press the play button on a connected component or on its own remote control, the receiver automatically turns on and changes the source to the component. On the other hand, if you select a new source on the receiver or on the remote control, the selected component begins playing immediately. In both cases, the previously selected source continues playing without sound for a few seconds. RX-8010V also allows you to play your MP3 files directly from your PC through a front USB input. This new flexibility allows you to play music recorded on your computer with the greatest fidelity.

Product Details

• Amazon Sales Rank: #205532 in Consumer Electronics
• Brand: JVC
• Model: RX8010VBK

Customer Reviews

Tons of inputs and great performance
There are a couple of key features that really make this unit stand out:

1) It has more inputs than you can shake a stick at, and once you have the thing configured properly, everything works just like you'd expect.

Most notably, it does audio *and* video source switching. All your video devices send their signals to the amplifier, and a single video out cable is run to the monitor. So when you switch inputs on the amp, the appropriate video source is automatually routed to the monitor for you.

It has 1 digital co-ax connection (RCA jack) and 4 fiber-optic digital inputs, and they can be assigned to different sources. In my case, I used a digital cable box as the co-ax source, my JVC cd changer as optical 1, and my JVC DVD player as optical source 2.

Not only does this provide an all-digital input path for these digital sources, but it greatly cleans up the wiring at the back of the unit.

And it still has inputs for 2 VCRs, a tape player, a turntable, a video camera (front inputs) a CDR/minidisc player, and a USB audio connection!

2) If you have other JVC components, the Compu-Link interconnection is a godsend, especially the Text-Compu-Link output from the CD changer. This allows the CD changer to export its displays (normally confined to the little LED readout on the changer) to the TV, via the amp. Search for disks/tacks/artists on the TV screen! This revolutionized the use of the CD changer.

All the amplifier features can be accessed this way as well.

3) Performance is very good. This is a very clean and crisp amplifier - perhaps not audiophile-quality, but there is no noise or distortion that I could detect at reasonable volume levels. The surround processor automatically recognises Pro-Logic, Dolby Digital, and DTS input streams and does the appropriate thing with them. I moved up from a basic Pro-Logic (RF, Cen, LF, Rear) amplifier, and the difference in sound dynamics was amazing.

The only beefs I have are minor:

1) The remote is poorly designed. Prior JVC remotes have been ergonomically designed, with common fucntions (volume, channel, DVD cursor) larger and located in such a way as they could be operated by feel. This remote is a plain rectangular grid with all the buttons the same size. Luckily, JVC seems to have kept the same IR codes for the last 10 years, so older remotes with better ergonomics can still be used with this unit.

2) Setting the unit up can take some patience. the manual isn't bad, but it takes dilligence to get all the inputs assigned and working correctly, especially the digital inputs. Some behavior was not initially obvious - but it IS all documented, if you take the time to _carefully_ read the manual.

Highly recommended!

DG

Tons of inputs and great performance
There are a couple of key features that really make this unit stand out:

1) It has more inputs than you can shake a stick at, and once you have the thing configured properly, everything works just like you'd expect.

Most notably, it does audio *and* video source switching. All your video devices send their signals to the amplifier, and a single video out cable is run to the monitor. So when you switch inputs on the amp, the appropriate video source is automatually routed to the monitor for you.

It has 1 digital co-ax connection (RCA jack) and 4 fiber-optic digital inputs, and they can be assigned to different sources. In my case, I used a digital cable box as the co-ax source, my JVC cd changer as optical 1, and my JVC DVD player as optical source 2.

Not only does this provide an all-digital input path for these digital sources, but it greatly cleans up the wiring at the back of the unit.

And it still has inputs for 2 VCRs, a tape player, a turntable, a video camera (front inputs) a CDR/minidisc player, and a USB audio connection!

2) If you have other JVC components, the Compu-Link interconnection is a godsend, especially the Text-Compu-Link output from the CD changer. This allows the CD changer to export its displays (normally confined to the little LED readout on the changer) to the TV, via the amp. Search for disks/tacks/artists on the TV screen! This revolutionized the use of the CD changer.

All the amplifier features can be accessed this way as well.

3) Performance is very good. This is a very clean and crisp amplifier - perhaps not audiophile-quality, but there is no noise or distortion that I could detect at reasonable volume levels. The surround processor automatically recognises Pro-Logic, Dolby Digital, and DTS input streams and does the appropriate thing with them. I moved up from a basic Pro-Logic (RF, Cen, LF, Rear) amplifier, and the difference in sound dynamics was amazing.

The only beefs I have are minor:

1) The remote is poorly designed. Prior JVC remotes have been ergonomically designed, with common fucntions (volume, channel, DVD cursor) larger and located in such a way as they could be operated by feel. This remote is a plain rectangular grid with all the buttons the same size. Luckily, JVC seems to have kept the same IR codes for the last 10 years, so older remotes with better ergonomics can still be used with this unit.

2) Setting the unit up can take some patience. the manual isn't bad, but it takes dilligence to get all the inputs assigned and working correctly, especially the digital inputs. Some behavior was not initially obvious - but it IS all documented, if you take the time to _carefully_ read the manual.

Highly recommended!

DG

Great general purpose a/v amplifier
I have had this unit up and running for more than two years. Right out of the box I ran analog and digital signals driving both studio monitors and consumer audio speakers.

It's been easy to use and works like a horse. I am yet to exhaust all of the types of interfaces available. My only regret is that I set it up in a tight home audio production studio space. This has limited my use of it for connectivity to video equipment to mostly games.

I hope someday to re-install it in an open space with a patch panel nearby. That'll probably best be post-poned until retirement. Too much excitement until then for a grown up working woman.