Product Description

BLOWER AND POWER CORD ONLY, DOES NOT CONTAIN THERMAL SWITCH OR SPEED CONTROL, Heat N Glow GFK-160A , Royal GFK-160A, GFK160, G330AN, G330AL, G330L, G330N, G336AN, G336AL, G336L, G336N, G342AN, G342AL, G342L, G342N, A36C, A36CH, A42C, A42CH, ADI-ZC-FB, ADI60, BCDV36, C40, CB4236IR, CB4842IR, CD42236R, CD484R, CD4236LR, CD4842LR, CD4236IR, CD4842IR, CD4236ILR, CD4842ILR, GBI25, GCBC60, GCBC80, GCDC60, GCDC80, GNTC80, MAXIUS DIRECT VENT, NOVI30, NOVI35, OLYMPUS, SC60, TITAN, Regency wood stove insert 846515 (blower) 490-917 , 170915, Model R7-RB168B

Product Details

• Amazon Sales Rank: #54559 in Kitchen & Housewares
• Brand: Fireplace Blower

Features

• Rotom Replacement # R7-RB168B, Blower only
• 115 CFM, 2400 RPM, .92 amps; Skelton Motor, 115 Volts
• cord with 2-prong plug; Mounting Bracket with magnets
• overall length = 13.0" x 4 7/8" height
• 2 openings: 1" x 4 7/8"

Customer Reviews

Blower motor replacement
This blower was purchased to replace a 20-year old identical Regency Wood Stove blower motor. It is exactly the same motor and blower. However, you will need to retain some of the old motor wiring to cut & crimp. The new motor comes with just a crimped power cord and an attached ground wire. You will need to cannibalize the old wiring in order to use your existing power switch and thermal overload. A minor nuisance.
The new blower might also have to be rotated 90 degrees on the baseplate. In order to gain access to the bolts, you have to pinch and remove the cotter pin and then pull (hard) on the plastic blades to remove. Another minor nuisance. Make sure you have a magnetized socket screwdriver handy.
Altogether, it took my fat fingers about 30 minutes to install. The new blower is whisper quiet.

Wakes up the old gas fireplace with modest noise
We built the old gas fireplace into our house ten years ago. We used it from time to time, but it did not seem to move the heat to where it can be used. I did some research and found that this was the proper fan. For the price, it has converted our gas fireplace into a third furnace. It puts off modest background sound, but negligible when compared to the benefits.

Easy to install and works great.
I am very happy with the fan. It is quieter than the old fan that went out and it blows just as much air. Installation was even easier than I expected as it comes with the cord all ready to go. This is a very good product if you need to replace your fireplace fan.